SOLUTION

Need an Emergency or Short-Term Rental

  • TOP
  • Need an Emergency or Short-Term Rental

Content 01Are You Facing These Rental and Temporary Sludge Treatment Challenges?

  • Your existing Sludge Dewatering Press has suddenly failed and you need a replacement unit until repairs are completed.
  • You are looking for a temporary dewatering press to continue Sludge Treatment during equipment renewal work.
  • You need to temporarily increase Sludge Treatment capacity during a peak season or production increase.

AMCON’s Solutions

VOLUTE DUO™ / VOLUTE™ Dewatering Presses are available for rental from as short as one month, for the period you need.

Installing a new Sludge Dewatering Press or carrying out a large-scale renovation requires several months of lead time and significant capital investment. With rental, you can reduce initial investment while continuing Sludge Treatment only for the required period.
In addition to the Sludge Dewatering Press itself, a complete set of equipment required for Sludge Treatment, such as Polymer Make-up System, pumps, and hoses, can also be rented.

Typical Rental Applications

Rental Sludge Dewatering Presses are widely used in situations such as the following.

Emergency and Troubleshooting Support

When an existing Sludge Dewatering Press fails and Wastewater Treatment cannot be stopped until repairs are completed, the rental unit can be used as a replacement. Because a shutdown in Sludge Treatment can affect the entire Wastewater Treatment process, rental is useful when a rapid response is required.

Temporary Dewatering during Equipment Renewal or Renovation

When equipment must be stopped for renewal work, seismic reinforcement work, or other renovation, the rental unit can be used as a temporary dewatering press to continue Sludge Treatment during the construction period. Long-term rental for several months is also available.

Capacity Increase during Peak Seasons or Production Increases

Rental can be used only during periods when temporary capacity is needed, such as peak production at food factories or a seasonal increase in sludge volume. It allows you to supplement treatment capacity only for the required period without a full-scale equipment expansion.

Pre-Verification before Full-Scale Installation

When considering a new Sludge Dewatering Press, rental can also be used to operate the equipment in the actual site environment and verify performance and operation in advance. It is used as a pre-verification step to help prevent mismatches after installation.

Features of AMCON Rental Service

Flexible Rental Periods from One Month

Flexible Rental Periods from One Month

Rental is available from as short as one month, for only the period you need. From short-term to long-term use, the rental period can be set according to your plan.

Complete Equipment Package

Complete Equipment Package

In addition to the Sludge Dewatering Press itself, a complete set of equipment required for Sludge Treatment, such as Auto Polymer Dissolving Devices, pumps, and hoses, can be rented.

Installation Plan Proposals

Installation Plan Proposals

We propose an appropriate installation plan for your site. You can consult us on the layout of the installation area and coordination with surrounding equipment.

Pre-Verification with a Sludge Sample Test

Pre-Verification with a Sludge Sample Test

Before rental begins, we use a Sludge Sample Test to confirm whether your sludge can actually be dewatered. We also support rental model selection and polymer proposals.

One-Stop Support through Operation Adjustment

One-Stop Support through Operation Adjustment

After delivery and installation, specialist staff handle the process through commissioning. The equipment is handed over after operation adjustment so that it can be used under suitable operating conditions.

Features of Sludge Dewatering Presses Available for Rental

The Sludge Dewatering Presses available for rental feature a clog-free structure that can handle oily sludge, together with a unique mechanism capable of dewatering low-concentration sludge. They are suitable for a wide range of industries and sludge types.

For details, please see the Sludge Dewatering Press rental page.

Rent a Sludge Dewatering Press

Case Studies

Rental Sludge Dewatering Press Supported Stable Operation and Helped Maintain the Treatment Line

Urakawa Purification Center, Hokkaido

While existing equipment was stopped for equipment renewal and seismic reinforcement work, VOLUTE™ was rented for approximately nine months as a temporary dewatering system. Sludge Treatment continued without interruption during the construction period.

Rental Sludge Dewatering Press Supported Stable Operation and Helped Maintain the Treatment Line
Temporary dewatering facility
Rental Sludge Dewatering Press Supported Stable Operation and Helped Maintain the Treatment Line
VOLUTE™ Dewatering Press DW-202

Learn More

From Rental Trial to Full-Scale Installation: Significant Reduction in Industrial Waste Disposal

Ajinomoto Co., Inc. Tokai Plant

The existing dewatering equipment had reached its treatment capacity. A rental unit was first used to verify dewatering performance under actual operating conditions before full-scale installation. This helped significantly reduce the volume of industrial waste requiring disposal.

From Rental Trial to Full-Scale Installation: Significant Reduction in Industrial Waste Disposal
Filtrate
From Rental Trial to Full-Scale Installation: Significant Reduction in Industrial Waste Disposal
sludge cake

Learn More

How the Rental Process Works

1.Contact Us

1.Contact Us

We discuss your rental period, sludge type, sludge volume, installation location, and other project requirements. Please contact us using the inquiry form or by phone.

2.Sludge Sample Testing

2.Sludge Sample Testing

We evaluate your sludge sample to verify compatibility with the AMCON Sludge Dewatering Press.
Please send approximately 2–3 liters of sludge (3–4 liters for inorganic sludge) along with a shipping invoice and Safety Data Sheet.
Sample containers should be prepared by the customer and will not be returned.

Address for sludge sample
AMCON INC. International Sales Department
1926, Nippa-cho, Kohoku-ku, Yokohama, Kanagawa Japan 223-0057
TEL : +81 45 540 8580

3.Site Assessment

3.Site Assessment

When required, our engineers conduct a site visit to confirm installation conditions.

4.Proposal and Agreement

4.Proposal and Agreement

We provide a quotation based on the rental period together with the delivery and collection schedule.

5.Delivery, Installation and Commissioning

5.Delivery, Installation and Commissioning

The equipment is delivered on the scheduled date. After installation, our specialists complete commissioning and operational adjustment before the rental period begins.

Common Questions

Can the unit be installed outdoors?
Yes. We can provide a proposal based on the installation environment and surrounding conditions, whether the location is outdoors or indoors. If needed, please consult us on rain protection measures such as tent installation.
Can accessory equipment also be rented?
Yes. We can provide a complete set of equipment required for Sludge Treatment, such as Auto Polymer Dissolving Devices, pumps, and hoses, through rental.

Let AMCON Support Your Emergency and Short-Term Rental Needs

From a Sludge Sample Test through model selection, delivery and installation, operation adjustment, and support during the rental period, AMCON provides one-stop support.

Whether you would like to continue Sludge Treatment during equipment renewal work or increase treatment capacity only during a peak season, please feel free to contact us even if you are still gathering information or evaluating options.

PRODUCTSBrowse by Product

Back to top