Their Problem

This factory had used multi disc type dewatering equipment for long time; however, they had been facing problems such as aging and lack of throughput of the equipment.
Due to a limited space for the dewatering equipment, they were looking for compact dewatering equipment with larger capacity.

AMCON’s Solution

AMCON offered VOLUTE™ Dewatering Press ES-303 model which can handle 12.8 m3/hr. as maximum for this sludge concentration at 7,000 mg/L. In case the existing building is too small to install this large scale equipment, large-scale construction work could be necessary such as re-construction of a new building or breakings down of the entrance. AMCON’s Sludge Dewatering Press VOLUTE™ can be divided into the Flocculation Tank part and the Screw part, which enabled transportation and installation through the existing narrow entrance. Water content resulted in better than the previous value at 85%. Customer’s comment: “It is helpful to be able to confirm flocculation and filtrate condition at sight.”

Customer Testimonial

Compared with the previous dewatering machine, which produced sludge cake with a Moisture Content of 85%, the VOLUTE™ Dewatering Press achieved better dewatering performance. The customer commented, “It’s great that we can easily see the flocculation process and the condition of the filtrate at a glance.”

Sludge cake

Flocs

For inquiries, contact us here.